Toro Tempus Air BS Base Station Bedienungsanleitung Seite 11

Step 6
SOLAR PANEL ASSEMBLY
The solar panel can be mounted on the wall or on a pole 40 to 60 mm in diameter, or with the addition of jaws on a pole of 60 to 120 mm.
Solar Panel Connection
During the first installation, before connecting the solar
panel, it is necessary to charge the Tempus Air BS battery,
turned off, for 24 hours with 230 VAC power supply.
After 24h of charging, disconnect the transformer and
connect the solar panel.
Prohibited connections
SOLAR PANEL ASSEMBLY HIGH WIND FIXATION
The Solar panel has another type of attachment sold apart from the so-called "high wind" for
exposures of the solar panel to winds above 50km / h.
FOR THE DETAILS OF THE ASSEMBLY OF THE PANEL AND THE FLANGES,
REFER TO THE INSTRUCTIONS PROVIDED IN THE BOX OF BINDINGS
FOR THE DETAILS OF THE ASSEMBLY OF THE PANEL AND THE FLANGES,
REFER TO THE INSTRUCTIONS PROVIDED IN THE BOX OF BINDINGS
Toro Tempus Air BS
✔
11