Transporting And Handling The Unit; Unpacking; Handling - Ingeteam INGEREV RAPID 60 Handbuch Für Montage Und Betrieb

Transporting and handling the unit

3. Transporting and handling the unit
You must protect the unit, during transport, from mechanical knocks, vibrations, water splashes (rain) and any
other product or situation which may damage it or alter its behavior.
Failure to observe these instructions may lead to loss of warranty on the product.

3.1. Unpacking

Correct handling of the units is vitally important in order to:
• Prevent damage to the packaging which enables them to be kept in optimum condition from shipping
until they are installed.
• Avoid knocks and/or falls which may harm the mechanical features of the units, e.g. cause incorrect
closure of doors, loss of IP rating, etc.
• Avoid, as far as possible, vibrations which may cause subsequent malfunction.
If you observe any anomaly, please contact Ingeteam immediately.
Separating the packaging
You can deliver all the packaging to an authorized non-hazardous waste management company.
In any event, each part of the packaging may be recycled as follows:
• Plastic (polystyrene, bag and bubble wrap): the appropriate container.
• Cardboard: the appropriate container.

3.2. Handling

The Rapid family of charging stations have been designed to be handled from the top. For this, a removable cover
has been fitted on the top of the housing that gives access to the four lifting points provided.
ACA2011IQM01_ - Installation and Operation Manual
Top opening of the station
Ingeteam
DE
EN
ES
FR
IT
PT
63