INVENTOR FS405B Bedienungsanleitung Seite 8

OPERATION INSTRUCTIONS
6. " " Silent
While the fan is operating, by pressing the "
While the unit operates under Silent function only the Silent indicator will be light on the
display, and the keys Fan Speed and Mode will not be operational (the rest of the keys will still
be operational).
To turn off the Silent function and return to the previous operation settings of the fan, press the
" key again.
"
Batteries
(not included in the packing)
Slide the battery compartment cover.
Insert the batteries, and make sure that the batteries are placed
as shown in Fig.11.
Slide back the battery cover.
NOTES: Use manganese or alkaline batteries of type "AAA". Do not
use rechargeable batteries.
WARNING!
Do not dispose of batteries in fire, batteries may explode or leak.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries.
Always safely dispose of used batteries.
Remote Control Operation
To operate the fan with the remote controller, always point the remote controller at the display of
the fan, then press the keys.
The remote controller will work at distances of up to roughly five meters and a maximum angle of
±15º.
II. Control Panel (Fig.12)
The keys of the control panel of the fan have the same operation as described in the Remote
Controller section.
III. Tilt Adjustment
To adjust the tilt of the air flow upwards or downwards, push the motor housing lightly to the
desireddirection.
IV. Height Adjustment
To adjust the height of the fan, loosen the height adjustment ring, carefully raise or lower the top
section of the fan and firmly retighten the height adjustment ring.
V. Overheat Protection
To protect from damage due to overheating for any unexpected reason, the fan is equipped with
a thermal fuse that burns out and turns off the fan.
ΕΝ
8
" key, the fan will enter the Silent function.
Fig.11
AAA Battery, 1.5v