Other Operations - Herschel T-MKS Installation Und Betriebsanleitung

Other Operations

a. Temperature Protection Warning:
If the High Temperature limit (set in Advanced Settings step 4) is ever
exceeded, ' ' will flash and the heater will stop working. Lower the
setpoint temperature to cancel.
b. Error Exception:
If the display shows 'Er', check that the sensor mode (see Advanced
Settings) is set to internal (or external if you used this sensor for a
bathroom). If the 'Er' message continues to display, contact Herschel.
c. Open Window:
The Open Window function will switch off the heating for 15 minutes
if the temperature drops 3˚C in 1 minute. You can switch the Open
Window function on and off in Advanced settings.
d. Adaptive Start:
In Smart mode, the heating switches on in advance of the next period
to ensure the next target temperature is reached by the start of that
period. You can switch Adaptive Start on and off in the Advanced
settings.
e. Specialist High Temperature setting (e.g. Hot Yoga):
For specialist high temperature uses such as hot yoga, you must override
the high temperature setting (default is 35°C) in the advanced settings.
TIP:
The SmartLife app is a 3rd party app that is constantly evolving and future
versions may have some differences to these printed instructions which were
correct at time of printing.
English