SwitchBot Curtain U Rail Benutzerhandbuch Seite 13

Control with SwitchBot Remote (Sold Separately)
You can control Curtain using a SwitchBot Remote. There are two buttons on Remote
and you can set an action for each of them from the app. Please refer to Remote's user
manual for more information.
Settings
Navigate to Curtain's detail page and settings page for a variety of features such as Light
Sensing (Beta), Delay, Schedule, Motion Mode, and more.
Light Sensing (Beta)
The light sensing feature allows you to set automations based on the illuminance level
or the relative intensity of sunlight. It's still in the beta stage and is being upgraded
continuously, so please explore the details in the latest app release.
Delay
You can set up 1 Delay for countdown action. You can set the countdown time,
percentage of opening or closing, and Motion Mode.
Schedule
You can set up 5 Schedules on board, or unlimited Schedules with a Hub. You can set
the day, time, percentage of opening or closing, and Motion Mode.
Motion Mode
Performance Mode gives Curtain more power* to move, which results in higher noise
level. This mode is good for daily uses.
Silent Mode gives Curtain less power to move, which results in lower noise level. The
best use case for this mode would be when you wake up with sunshine.
* Moves up to 8 kg / 17 pounds of curtain (test results from controlled experiments in
our lab)
Charging, Firmware and Factory Reset
Charging
It takes about 10 hours
full charge 2 . You may also purchase our Solar Panel to charge by sunIight
1. 5V 1A adapter is required to charge with adapter.
2. Battery life is tested under condition of runway of 3 meters, loaded with 8 kg of
curtain, opened and closed twice a day, 25°C. Battery life may vary given different
condition.
3. Illuminance Level 6 is required to charge with Solar Panel.
1 to fully charge the battery and the battery lasts 8 months after a
13
3 .