App Control - SwitchBot Curtain U Rail Benutzerhandbuch

Install with the Clip (Optional)
If you use double side curtain, you need two SwitchBot Curtains to open it from the
middle. Alternatively, you can use the auxiliary Clip we provide to turn it into a single
side curtain so that you only need one SwitchBot Curtain.
To do that, fully close the curtain so the 2 panels are closest to each other. Connect the
upper parts of the two panels by using the Clip. Draw the curtain back and forth to make
sure the two panels move as one. Then you can refer to Step 2: Install on Your Curtain
Track on how to set the Curtain up.
Step 3: Calibration
Calibration is for your Curtain to adapt to your existing curtain track. You need to
calibrate before you can control it from your phone or every time you change the Open
Mode in the app. You can also redo the calibration on Curtain's Settings page.
Control
Lots of convenient ways to control, at your will.

App Control

Open and close the curtain at your fingertip. We offer intuitive App control for iOS and
Android, with weekly/bi-weekly updates following feedback from you. OTA firmware
update is also available for better user experience.
Touch & Go
Even with SwitchBot Curtain, you'd probably still instinctively draw the curtains by hand
sometimes. When it senses you drawing the curtain, the SwitchBot Curtain will kick in
and do the work for you. We call this Touch & Go.
10