Herunterladen Diese Seite drucken

Werbung

OPENING YOUR LOCK
1.
Open the Dust Cover from the top to reveal the Push Buttons and
the Opening Lever.
2.
When purchased, no combination is set, push down the Opening
Lever to open.
SETTING YOUR PERSONAL COMBINATION
1.
Open the Front Door to reveal the setting mechanism.
2.
Remove the Setting Key.
3.
Choose a combination and write it down prior to setting the lock.
4.
Using the Setting Key, turn the yellow dial of the chosen digit, e.g.
3, 180 degrees, so that the arrow is pointing away from you.
5.
Back to the Front Door, repeat Push Buttons for each chosen
number/letter.
6.
Test combination prior to closing the lid (see note 1)
6.1. After setting, if you push the opening lever, it will
appear to be locked.
6.2. Enter your combination to test the function.
6.3. Before re-enter combination, please pull the Clear
Button to clear number.
6.4. Re-enter combination and push Lever to close.
7.
Return Setting Key to original position for future use.
WALL MOUNTING YOUR LOCK
NOTE: you will require a X-head/Pozi screwdriver, pencil, a spirit level,
drill bit, a drill and a hammer.
1.
Open the Dust Cover.
2.
Take out the lock from Dust Cover and open the Front door.
3.
Position the lock on the desired mounting surface.
4.
Use a spirit level to check that the lock is vertical.
5.
Make the position of the screw holes on the desired surface.
6.
Remove the lock.
7.
Drill holes.
8.
Use hammer to fit wall plug (if necessary).
9.
Put the lock back into the Dust Cover.
10. Mount the lock with Dust Cover, insert and tighten screws.
11. Close the storage compartment.
NOTES:
1.
You can change the combination at any time.
2.
We suggest that you mount the lock in a discrete location away
from direct view, such as porches, garage, out of direct eye line.
3.
Keep dust cover closed to increase weather resistance and to
conceal the dials from view.
GUARANTEE REGISTRATION
Please submit your guarantee registration by visiting our website
www.phoenixsafe.com and clicking on guarantee registration.
For further assistance or information
please contact us on 0151 944 6444.
APEX HOUSE, 1 ORRELL MOUNT, LIVERPOOL, L20 6NS,
UNITED KINGDOM | +44 (0)151 944 6444
Phoenix Safe Company
Where peace of mind is guaranteed
LOCK INSTRUCTIONS
Opening Lever
Levier d'ouverture
Öffnungshebel
Push Buttons
Boutons poussoirs
Zifferntasten
Storage
Compartment
Espace de
rangement
Aufbewahrungsbereich
Yellow dial unset (Arrow towards you)
Cadran jaune désactivé (Flèche vers vous)
Yellow dial set (Arrow pointing away)
Cadran jaune installé (flèche pointe vers le haut)
Using the pencil mark the position of the screw holes to be drilled.
À l'aide du crayon, marquez la position des trous à percer pour les vis.
Benutzen Sie einen Bleistift, um die Bohrlöcher zu markieren.
KS0003C
Front Door
Porte avant
Vorderseite
Clear Button
Bouton Effacer
Vorderseite
Dust Cover
Couvercle de protection
Staubschutz
Setting Key
Clé de réglage
Stellschlüssel
Yellow Dials
Cadrans jaunes
gelbe Stellscheiben
V1 SEPT 2022

Werbung

loading

Inhaltszusammenfassung für Phoenix KS0003C

  • Seite 1 For further assistance or information please contact us on 0151 944 6444. APEX HOUSE, 1 ORRELL MOUNT, LIVERPOOL, L20 6NS, UNITED KINGDOM | +44 (0)151 944 6444 Phoenix Safe Company Where peace of mind is guaranteed V1 SEPT 2022...
  • Seite 2 Schaltfläche „Garantieanmeldung“ auszufüllen. 326 RUE HENRI BECQUEREL, ALLEE D, BATIMENT D9, DEUTSCHLAND GMBH, BAHNSTR. 23, 60230 CHAMBLY, FRANCE | 0033 (5) 45 31 32 80 D-42327 WUPPERTAL 0049-202-69519-0 Phoenix Safe Company Where peace of mind is guaranteed...