Synco G2 Benutzerhandbuch Seite 8

The system will pair automatically after power on.
(Note: Before successfully connecting, the transmitter channel will display A by default.
The TX connected to the receiver first is Channel A, and the one connected later is
Channel B.)
Manual pairing: long press the Channel A Gain Control and Channel B Gain Control on
the RX and pairing on the TX for 3 seconds at the same time.
RX
1. Power/Mono/Stereo Switch
Long Press 2s: turn on/off the system
Short Press: Switch Mono/Stereo mode (Note: Stereo mode is unavailable in phone
devices.)
2. Charging
5V/2A; with USB-C Charging Cable
Please fully charge the product before use.
8