Wifi Operation - FLINQ H3 PRO Handbuch

This product can automatically swing from side to side to realize horizontal wide angle heating.
Operations are as follows:
Swing button/Child lock button:
1. In the condition of working touch the button and the appliance will swing from left to right.
Touch the button again can stop the swinging. The buzzer will ring every time touching the
swing button.
2. When turned on long press the child lock button 3seconds to enter the child lock state with
the buzzer ring once (the other butootn can't work). Long press the button for 3seconds to
cancel the child lock with the buzzer ringing once.
Notice: The child lock wll be canceled automatically when unplugged.
Anti-pitch protection:
When the unit is overturned the power will be cut of and the heating components fans and head
shaking will be turned off. The unit will beep for 1 minute and then enter the standby state.
Overheat Protection:
After turning on the warm wind or hot wind mode long press the power button to shut down the
heating component will be shut down first. The fan will be turned off after one minute. All the light in
the panel will blink for one minute and enter the standby state.
Auto-shut off:
When the unit runs continuously for 24 hours, it will shut down automatically and enter the standby
state.
05/ USING INSTRUCTION
•
Do not cover the vent grill with anything to avoid fire.
•
Do not block the air inlet and air outlet, keep a distance of at least 30cm on the back and side
of the unit.
•
Do not close to the air outlet for a long time to avoid scalding when the unit is working.
•
Clean the filter regularly to ensure enough air volume and avoid overheating protection.
•
Ensure the power cord is in good condition:.Ensure the back power button is turned off.
Before connecting the power supply please check whether the voltage of the product is
consistent with the local power supply voltage.

06/ WIFI OPERATION

1. Use your mobile phone to scan the OR code below to download the Tuya-app . You can also search
for Tuya in the APP Store or Google Play to install the APP.
2. Open the Tuya App and use you phone number or e-mail to register your Tuya-account, then login.
Add device:
1. Connect your phone to your home Wifi and turn on bluetooth (please select 2.4ghz WiFi
network). Open the Tuya App.
2. Enter the homepage of the Tuya-app. Click "+" to select to add a device, the APP will display
manual addition and automatic discovery.