Preparation - Ohyama WOOZOO SCD-130P Bedienungsanleitung

Black

Preparation

■ Assembly of the cleaner
To use the cleaner as a stick cleaner
Assemble the main unit, extension pipe,
and floor head
①Insert the extension pipe into the main unit.
② Attach the floor head to the extension pipe.
Main unit
Insert the
extension pipe into ①
the main unit until
it clicks
Insert the floor
head into the
extension pipe until
②
it clicks
* Place the cleaner on the stand after assembly,
or lean it against the wall with non-slip rubber
attached, so that it will not fall down.
To use the cleaner as a handheld
cleaner
• Attach the floor head or thin nozzle with the cleaner
directly to the main unit.
Extension pipe
How to remove the extension pipe
and floor head
• To remove the floor head, pull it out while holding down
the floor head removal button.
• To remove the extension pipe, pull it out while holding
down the pipe removing button.
Floor head
8
Main unit
Insert the floor
head into the
main unit until it
clicks
* Lay the cleaner on its side after assembly so that it
will not fall down.
Pipe removal
button
Floor head
removal button
EN
SCD-130P
Floor head