Microwave Cooking - Toshiba MM2-AM23PF Bedienungsanleitung

OPERATION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1. Waiting State
At the initial power on, buzzer sound once, The LED will display "0:00" ,oven enter
waiting state. There are three types of conditions into waiting state:
a. At the initial power on, press any key.
b. In the process of setting, press " Stop " to enter.
c. If there is no operation within 1 minute, enter waiting state.
2. Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
a. In waiting state, Press " Clock/Pre-set ", the hour figure flash.
b. Turn " " to adjust the hour figures, the input time should be within 0--23 .
c. Press " Clock/Pre-set " twice, the minute figures will flash.
d. Turn " " to adjust the minute figures, the input time should be within 0--59.
e. Press " Clock/Pre-set " to finish clock setting. ":" will flash.
• If the clock is not set, it would not function during the process of clock
setting.
NOTE
• During the process of clock setting, if no oppreation in 1 minute, the
oven will go back to the previous status automatically.

3. Microwave Cooking

a. In waiting state , Press the " Microwave " key once, and "P100" display.
b. Press " Microwave " key several times or turn "
"P100", "P80", "P50", "P30", "P10" will display in order.
c. Press " Start/OK/+30Sec " to confirm.
d. Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
e. Press " Start/OK/+30Sec " to start cooking.
• In the process of setting, if the " stop " button is pressed or if there is
NOTE
no operation within 1 minute, the oven will go back to the former
setting automatically. The Settings made are invalid.
INSTRUCTION FOR USE
" to select the microwave power
EN-14