Product Package - NiteBird SL3 Benutzerhandbuch

Product Package

1. Light Strip
2. Smart Controller
3. User Manual
4. 8 Piece Adhesive Tape
LED Light Strip
Input: DC 5V, 1A
Rated Power: 5W
WiFi Frequency: 2.4GHz
Light Emitting Mode: RGB
Install the LED USB Light Strip
Please plug into TV's 5V 1A USB port. Press the
round power button of the USB controller for
about 5 seconds until the Light Strip flashes blue
rapidly.
Note: Here are some tips about installing 9.2ft
Smart TV Backlight:
1. The strip light should be placed on a clean and
dry surface and secure the four corners with 8
black sticky tapes, two at each corner after
installing the strip light.
2. The USB controller cannot be hung down.
3. If the USB controller is hanging down, it needs
to be fixed in place by adhesive tape.
3