Ausek DL-001 Bedienungsanleitung Seite 7

Note: When "TimeLapse" is ON,The camera can shot photos only,and
the recording function can only be used if the "timelapse" is OFF.
Setting of "Time
Setting"
Timer Set
Start Stop
00:00 23:59
MENU Exit
Note: When "Timer Setting" is ON,the camera does not work outside the
set working hours.
Setup the camera outdoor
Once all the setting has been done,the camera is ready for field use:
● Mount the camera about 0.5-2m high with the camera pointed at a
slight downward angle.
● Keep the camera facing north or south NOT east or west due to
sunrise and sunset could produce false triggers and overexposed
images.
●
Clear all obstructions in front of camera to avoid obscuring
camera lens or P I R sensor.Otherwise, the camera may be
triggered by mistake during windy or hot days.
● In order to avoid false triggers,you should adjust PIR sensitivity
depend on the object or wild animals size, the speed and distance
of the movement.
● Make sure that time and date is correct.
● Make sure that the camera's mode switch is "ON" mode(before
you leave).
● Slide the switch to "TEST"
position(The screen
is on)；
● Setting of "Time
Setting"：Select "Time

Setting"
→
Press "OK"
→
Select "ON"
→
Set the
working time period.
OK Enter
- 6 -