Rollei 45001 Anleitung Seite 66

Operation
66
– Offset mode: The offset mode sets the temperature with
a deviation of up to 5 °C . If the temperature set on the
thermostat (e .g . 20 °C) deviates from the achieved room
temperature (e .g . 18 °C), an offset temperature (e .g . -2 °C)
can be set to compensate for this deviation .
– Eco/Comfort mode: The eco mode sets the temperature
to approx . 17 °C at the factory . The comfort mode sets the
temperature to approx . 21 °C at the factory .
– Frost protection mode: The frost protection mode
prevents unwanted frost in the heater and sets the tempe-
rature to at least 8 °C . When the frost protection mode is
active, all other heating plans are inactive .
– Limescale protection mode: The limescale protection
mode prevents unwanted calcification of the heating and
opens the heating valve regularly for a short period of time .
– Energy-saving mode: The energy-saving mode prevents
unwanted heating and closes the heating valve . When the
energy saving mode is active, all other heating plans are
inactive .
ENGLISH