AFRISO FTM T Betriebsanleitung Seite 27

6 Commissioning
6.1 Teaching in
 Verify that the product is in the vicinity of the AFRISOhome gateway.
 Verify that the AFRISOhome gateway is in "Learn" mode. See the operat-
ing instructions of the AFRISOhome gateway for information detailed
information.
 If you intend to mount multiple products, start by creating a mounting plan
with the appropriate mounting locations. Then label the products with
numbers or the corresponding mounting location to help avoid confusion
of mounting locations.
ELECTROSTATIC DISCHARGE
• Always earth yourself before touching electronic components.
• If you press down the LRN pushbutton with a finger, make sure to avoid elec-
trostatic discharge.
Failure to follow these instructions can result in equipment damage.
All manuals and user guides at all-guides.com
Commissioning
NOTICE
1. Remove the product from the
holder.
2. Lift the cover using a screwdriver
and remove the cover.
3. Press the LRN pushbutton of the
product with an object that is not
pointed and not conductive.
- The product sends an learn tele-
gram (LRNTEL) to the AFRISO-
home gateway.
- The product is now connected to
the AFRISOhome gateway.
4. Refit the cover.
5. Push the product onto the holder
until it snaps in.
FTM T / FTM TF
EN
11