Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. SMS Anleitungen
  4. Regale und Aufbewahrungen
  5. Leddy M000275
  6. Handbuch für installation und anpassung

SMS Leddy M000275 Handbuch Für Installation Und Anpassung

Vorschau ausblenden

Werbung

Quicklinks

Diese Anleitung herunterladen
INSTALLATION AND
ADJUSTMENT MANUAL
M000275
K09-004 SMS Leddy Wall Floor 5x5 for LG LAS
DE Handbuch für Installation und Anpassung
IT Manuale per l'installazione e la regolazione
ES Manual de instalación y ajuste
FI Asennus- ja säätöohje
FR Manuel d'installation et de réglage
NL Handboek voor installatie en instellingen
PL
RUS
ARB
SE Monterings- och justeringsmanual
GR

Werbung

loading

Verwandte Anleitungen für SMS Leddy M000275

Inhaltszusammenfassung für SMS Leddy M000275

  • Seite 1 INSTALLATION AND ADJUSTMENT MANUAL M000275 K09-004 SMS Leddy Wall Floor 5x5 for LG LAS DE Handbuch für Installation und Anpassung IT Manuale per l'installazione e la regolazione ES Manual de instalación y ajuste FI Asennus- ja säätöohje FR Manuel d’installation et de réglage...
  • Seite 2 Advertencia Avertissement El montaje del producto no es responsabilidad de SMS Smart Media Solutions AB y es muy Le montage doit impérativement être effectué de façon correcte et ne relève pas de la importante que el producto sea montado correctamente. El montaje incorrecto puede responsabilité...
  • Seite 3 Sulla ricevuta devono essere chiaramente leggibili nome be clearly legible on the receipt. The owner is to pay the cost of returning the product to SMS, while del fornitore e data d’acquisto. Le spese di spedizione a SMS sono a carico dell’acquirente;...

  • Seite 4: You Will Need

    LEDDY 5x5 ASSEMBLY INSTRUCTIONS YOU WILL NEED Allen key No. 4, No.6 NOT INCLUDED Display incl. cabinet (25x) 17x (optional) NUMBER OF PERSONS REQUIRED...

  • Seite 5: List Of Parts

    LEDDY 5x5 5 LIST OF PARTS (1x) (1x) (4x) (1x) (1x)
  • Seite 6 LEDDY 4X4 LIST OF PARTS (continued) (1x) (1x) (3x) (1x) (1x) S1 (37x) S2 (120x) DIN912 ISO 4762 [M8x16] DIN912 ISO 4762 [M5x10]...
  • Seite 7 LEDDY 5x5 7 LIST OF PARTS (continued) S3 (40x) DIN912 ISO 4762 [M5x16] (1x) (1x) (2x) (4x) (6x) (1x) (1x) (1x) (1x) (1x)
  • Seite 8 LEDDY 5x5 Prepare frame A1 Remove 2U codec box brackets from frame Skip step 1 and jump to step 2, page 9 if using 2U codec box A1(1x) Dismount...
  • Seite 9 LEDDY 5x5 9 Prepare frame (A1) A4(1x) A1(1x) Slide FRONT A3(1x) VIEW Slide...
  • Seite 10 LEDDY 5x5 Join bottom frame (A1 & A2) Tighten A1(1x) REAR VIEW A2(1x) Tighten Tighten...
  • Seite 11 LEDDY 5x5 11 Mount wall brackets on frame (do not tighten) A5(4x) REAR VIEW S1(8x) (8x)
  • Seite 12 LEDDY 5x5 Stabilise! Level frame on floor Lean frame against wall FRONT...
  • Seite 13 LEDDY 5x5 13 Slightly loosen wall plates FRONT Loosen Loosen...
  • Seite 14 LEDDY 5x5 Mark holes Adjust top wall bracket Min (2x per large wall plate to increase distance to 1x for bottom plate) allow floor skirtings where required Position of bottom side trim 1. Start levelling from the middle bracket & ensure that the bar is level (horizontal) 2.
  • Seite 15 LEDDY 5x5 15 Drill holes on wall Min 70 mm Min 70 mm...
  • Seite 16 LEDDY 5x5 Bolt bracket to wall Use suitable wall screws FRONT Tighten all wall plates Check frame is level and square before proceeding Use guide (groves) when using laser leveller...
  • Seite 17 LEDDY 5x5 17 Mount pillars on base frame B2(1x) B3(4x) B1(1x) S1(10x) (10x)
  • Seite 18 LEDDY 5x5 Mount top bars C2(1x) S1(7x) C1(1x) (7x)
  • Seite 19 LEDDY 5x5 19 Check frame is square & mark holes Min. 2x per top wall plate...
  • Seite 20 LEDDY 5x5 Drill holes on wall (min. 2x per plate) Min 70 mm Min 70 mm...
  • Seite 21 LEDDY 5x5 21 Bolt bracket to wall Use suitable wall screws...
  • Seite 22 LEDDY 5x5 1. Loosen top Level & square frame wall plates before proceeding Use guide (groves) when using laser leveller 2. Adjust 3. Tighten all wall plates Tighten all Tighten all wall plates Level & square frame...
  • Seite 23 LEDDY 5x5 23 Guide cable Refer display manual for cable mounting & connections...

  • Seite 24: Simplified Cabinets Shown In Pages Ahead For Clarity

    LEDDY 5x5 Prepare all display cabinets for mounting Dismount LED displays Refer display manual for procedure to dismount LED displays Simplified cabinets shown in pages ahead for clarity...
  • Seite 25 LEDDY 5x5 25 To adjust display mounting plates, follow procedure on page 26 Mount display cabinets Refer display manual (4x /display cabinet) Start mounting from bottom left corner Start...
  • Seite 26 LEDDY 5x5 Procedure to adjust display mounting plate Adjust display mounting plate if required Adjust plate Fixed plate...
  • Seite 27 LEDDY 5x5 27 Slide and slot cabinets into position Refer display manual (4x /display cabinet) Complete the assembly...
  • Seite 28 LEDDY 5x5 Connect cabinets to each other S2(20x) S3(40x) (20x) (40x) Connect cables (2x) to each display column Refer display manual...
  • Seite 29 LEDDY 5x5 29 Mount LED displays Refer display manual...
  • Seite 30 LEDDY 5x5 Complete assembly Refer display manual...
  • Seite 31 LEDDY 5x5 31 Mount controller box and media player Refer display manual...
  • Seite 32 LEDDY 5x5 For 2U codec box only Mount 2U codec box Refer display manual...
  • Seite 33 LEDDY 5x5 33 Refer display manual for procedure to attach cables to controller box and media player Attach (top) trim brackets D5(6x) S1(12x) (12x)
  • Seite 34 LEDDY 5x5 Mount side & top trim D2(1x) D4(5x) “CLICK” D1(1x) D3(2x) “CLICK”...
  • Seite 35 LEDDY 5x5 35 Mount doors Check sequence for installation Door adjustments...

  • Seite 36: Product Dimensions

    LEDDY 5x5 PRODUCT DIMENSIONS 120,72 3066,3 4,00 101,5 All dimensions in mm. Dimensions in brackets [ ] are in inches SMS Smart Media Solutions AB Hästholmsvägen 32, 5th floor, SE-131 30 Nacka, Sweden www.smartmediasolutions.se...