Technical Specifications; Preparation Before Use; Coupling To The Tractor - R2 TST 100 Handbuch Für Gebrauch Und Wartung

Technical specification Mod. TST 100 - 113
The STONEBURIER Mod. TST is built in the TST 100 - 113 version
Milling length............................................................... 100 cm
Levelling length............................................................ 100 cm
Compressing length ..................................................... 122 cm
Required power ........................................................... 18 - 30 HP
Max. working depth...................................................... 15 cm
No. of hoes................................................................. 26
Weight....................................................................... 195 Kg

Preparation before use

Before starting operation it is necessary to perform following steps:
- Check that the machine is in perfect working order.
- Check that lubricant is at the correct indicated level.
- Check the tightness of the bolts and that all parts are in perfect order.

Coupling to the tractor

Insert the two parallel connector arms of the tractor (Fig.4 - Ref.A) to the movable brackets of the STONEBURIER
Mod. TST (Fig.4 - Ref.B).
Connect the third point (Fig.3 - Ref.A) adjusting the STONEBURIER Mod. TST in order to archive the best working
position (Fig.3 - Ref.B).
Pull the chains of the lifter arms so that the machine does not sway sideways.
B
A
D
TST 100 TST 113
113 cm
113 cm
130 cm
18 - 30 HP
15 cm
30
210 Kg
C
g.1
9