BeeSecure BEE-OMS Bedienungsanleitung Seite 4

2. Install Battery
3. Install BEE-OMS
After pairing with the hub, the object movement sensor can be installed
within 20m from the hub. Peel off the protective film of the double-sided
scotch tape at the back of the sensor, and stick to the surface of the object
(any valuable object, e.g. safe, drawers, tv or windows). We recommend
to place the sensor out of reach from children and keep it as hidden as
possible in case of being seen by the intruder.
4. Set up sensitivity level
BEE-OMS offers 3 levels of sensitivity, Low-Medium-High which can detect
from a knock at the surface of the object to intensive damage or
movement to the surface of the object. The examples listed below shall
give you a better idea about each level
Low: detects very intensive shakes or damage at the surface of
•
the object, e.g. someone strikes to break your window
Medium: detects average movement or vibration at the surface
•
of the object, e.g. someone carries and move your safe or a
heavy knock on your window
High: detects subtle movement or vibration, e.g. someone
•
wearing high heels walking by your safe or gentle knock on your
window
Please try several times the levels to find the best setup for your needs
and adjust it. For example, when you have your kids playing around the
1
2