Install The Battery - BeeSecure BEE-MS Bedienungsanleitung

V1.0
1.5 Steps to Follow
• Step 1: Download the BeeSecure App and Register
• Step 2: Install the Battery of the sensor
• Step 3: Add the BEE-HUB to the Wi-Fi from the App
• Step 4: Pair BEE-MS with the BEE-HUB from the App
• Step 5: Install the BEE-MS
• Step 6: Set up the BEE-MS from the APP
Read the full version of user manual online or follow BeeSecure in-app instructions to add and set
up your BEE-MS
It is suggested to follow the steps to install and set up your device. While connecting the BEE-MS with
the hub, please keep the distance between the sensor and the hub as close as possible. After
successfully connecting the hub and motion sensor, you can install the sensor up to 20 meters from
the hub (depending on the working environment).

2. Install the Battery

1. Press the tab slot on the back of the sensor and open it from the sides
2. Remove the insulating film between the battery and the metallic blade.
3. Put the cover back
After installing the battery, the LED light on the sensor will blink 3 times, the sensor will start to
initiate. The process will take about 9 seconds.
3.Install the BEE-MS
After pairing the motion sensor and the hub, the motion sensor can be installed up to 20 meters
from the hub (depending on the working environment). To ensure the distance between the
motion sensor and the hub is within communication range, you can check the status next to the
sensor in the Home page of BeeSecure App. Green light indicates the sensor is online and
functioning, orange light indicates the sensor is offline/outside of the communication range.
1. Connect the mounting base by pressing the roller ball towards the base and punch through
the holes provided to mount the sensor on walls or at the corner of a room.
2. Attach the motion sensor with the mounting base
www.beesecure.eu
English