cecotec bolero COOLMARKET SBS 430 WHITE Bedienungsanleitung Seite 32

ENGLISH
If the refrigerator is installed in a wet place, you must check the earthed cord and the leakage
breaker are working normally. If vibration noises occur due to contact of the refrigerator with
the wall or if the wall turns black due to air convection around the compressor, remove the
refrigerator from the wall.
The installation of the refrigerator may cause noise interference or image problems in mobile
phones, landline phones, radio receivers or televisions near the refrigerator, so in this case,
keep the refrigerator as far away from these objects as possible.
4. OPERATION
Fig. 3 Control panel
1. Freezer compartment icon
2. Smart icon
3. Inverter icon
4. Fast freeze icon
5. Temp. Zone button
6. Function button
7. Unlock button
8. Refrigerator compartment icon
9. Digital temperature indicator
10. Temperature button
11. OK button
When you connect the refrigerator to the power supply for the first time, all icons on the
display will light up for 2 seconds, and the system will activate the Smart function by default.
When all doors are closed, the display will automatically switch off if no button is pressed
within 3 minutes. The display will light up if you open a door or press a button. Please note that
the child lock is activated after 3 minutes of inactivity so the buttons will be inactive until you
deactivate the child lock.
The Inverter icon will light up when the refrigerator is connected to the mains and the
compressor starts.
Functions
Temperature setting
Setting the refrigerator compartment temperature
Press the Temp. Zone button until the refrigerator compartment icon starts flashing, then
press the temperature button to select the desired temperature; finally, press the OK button
62
to confirm the setting.
The temperature setting cycles of the refrigerator compartment are:
5ºC › 6ºC › 7ºC › 8ºC › OFF › 2ºC › 3ºC › 4ºC › 5ºC
OFF means the refrigerator compartment is off, and when you activate this function, the
refrigerator will stop cooling.
Make sure you remove all the food from the refrigerator compartment before setting this
function.
Setting the freezer compartment temperature
Press the Temp. Zone button until the freezer compartment icon starts flashing, then press the
temperature button to select the desired temperature; finally, press the OK button to confirm
the setting.
The temperature setting cycles of the freezer compartment are:
-18ºC › -17ºC › -16ºC › -24ºC › -23ºC › -22ºC › -21ºC › -20ºC › -19ºC › -18ºC
Fast freeze
When you activate the fast freeze function, the freezer compartment temperature will be set
to -32°C automatically. The fast freeze function is used to prevent loss of nutritional quality
and to preserve the freshness of the food.
You cannot modify the temperature of the freezer compartment in the fast freeze
function.
Activation of the fast freeze function
Press the Function button until the fast freeze icon starts flashing, then press the OK button
within 5 seconds to confirm your choice. If you do not press the OK button within 5 seconds, the
function will not be activated.
Deactivation of the fast freeze function
After 26 hours of operation, the fast freeze function will be automatically deactivated.
With the fast freeze function activated, press the Function button until the fast freeze icon
starts flashing, then press the OK button to confirm and the fast freeze function will be
deactivated.
When you activate the Smart function, the fast freeze function is automatically deactivated.
Smart
When you activate the Smart function, the temperature in the refrigerator compartment will
be set to 5°C and the temperature in the freezer compartment will be set to -18°C, so that food
will be preserved in the best possible conditions and the refrigerator will operate as efficiently
as possible.
You cannot modify any temperature in the Smart function.
ENGLISH
BOLERO COOLMARKET SBS 430 WHITE / INOX / DARK BOLERO DRESSCODE TOP 80 INVERTER
63