cecotec bolero COOLMARKET SBS 430 WHITE Bedienungsanleitung Seite 31

ENGLISH
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
1. PARTS AND COMPONENTS
Fig. 1
1. LED light
2. Door shelves (freezer compartment)
3. Shelves (freezer compartment)
4. Lower shelf
5. Freezer compartment drawer
6. Refrigerator compartment drawer
7. Egg holder
8. Shelves (refrigerator compartment)
9. Door shelves (refrigerator compartment)
Note:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This product includes a packaging designed to protect it during transport. Take the
refrigerator out of the box. You can keep the original box and other elements in a safe
place, this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
Levelling
- Make sure you level your refrigerator with the front levelling feet. If it is not levelled, the
refrigerator performance will be affected, or it can even cause a malfunction.
- After installing the refrigerator, wait 4 hours before using it, to allow the refrigerant to
stabilise.
3. INSTALLATION
60
The location you choose for the refrigerator must be properly ventilated and away from heat
sources. Do not place the refrigerator near heat sources, like a cooker, and avoid direct sunlight
to ensure the cooling effect and save on energy consumption. It is not recommended to place
the refrigerator in a wet place, as it may rust and cause electrical leakage.
During operation, the refrigerator releases heat into the environment. Therefore, you should
leave at least 300 mm of free space at the top, more than 100 mm on both sides and more than
50 mm at the rear of the refrigerator.
Height
Width (mm) Depth (mm)
(mm)
839 637 1763
Fig. 2
Note
Figure 2 only illustrates the space required for the refrigerator.
Stable surface
Place the refrigerator on a solid, flat surface to keep it stable, otherwise vibrations and noises
will occur.
Ensure a ventilation free of obstacles around the refrigerator.
Preparing for use
Waiting time
Once the refrigerator is installed and clean, do not turn it on immediately, wait at least 4 hours
before connecting it to the power supply.
Cleaning
Check the position of the shelves and drawers in the interior of the refrigerator and clean the
interior with a soft cloth.
On
Connect the plug into a power socket to switch on the refrigerator. After one hour, open the
freezer compartment door, if the temperature inside the freezer compartment has clearly
dropped, the cooling system is operating normally.
Food storage
- Once the refrigerator is operating, insert the food.
- When the temperature is high, food may take longer to cool completely (try to open the
refrigerator doors as infrequently as possible).
ENGLISH
A (mm) B (mm) C (°) E (mm) F (mm)
1447 1013 140 50 100
BOLERO COOLMARKET SBS 430 WHITE / INOX / DARK
61