Listening To The Dab/Dab+ Radio - Sony XAV-AX1005DB Bedienungsanleitung

Listening to the DAB/DAB+ Radio

To listen to the DAB/DAB+ radio, press HOME then
touch [DAB+].
Tips
• Set [Antenna Power] to [ON] (default) or [OFF] depending
on the type of DAB antenna (aerial) (not supplied)
(page 11).
• When [DAB+] is selected for the first time after performing
the factory reset, the auto tune starts automatically. Allow
the auto tune to finish. (If interrupted, the auto tune will
start again the next time you select [DAB+].) If no DAB
station is stored by the auto tune, tune by touching [Auto
Tune] of (list).
Reception controls/indications

(list)
Open the station list.
 Current band
Change the band (DAB1, DAB2 or DAB3).
 Station group name, station name

(DAB Options)
Open the DAB Options menu.
 SEEK–/SEEK+
Search for stations.

/
Search for station groups.
(Available only when [Seek By] is set to [Station
Gp].)
 Preset numbers
Select a preset station. Swipe right/left to show
the other preset stations.
Touch and hold to store the current station in
that preset.
10
GB
Searching for station by station group
Before operation, set [Seek By] to [Station Gp] for
searching by station groups (page 11).
1
Touch SEEK+/– to search for a station.
Scanning stops when the unit receives a station.
Search until the desired station is received.
To search for a station group
Touch and hold /
and release when the desired station group is
displayed.
Storing a station manually
1
While receiving the station that you want to
store, touch and hold the desired preset
number.
Receiving stored stations
1
Touch the desired preset number.
Searching for station by station name
Before operation, set [Seek By] to [A-Z] for
searching by station name (page 11).
1
Touch .
The station list appears.
2
Touch the desired station.
To search from playback screen
Touch SEEK+/– to switch to the previous/next
station.
To update the station list
Touch , then touch [Auto Tune].
to search for a station group