Cudy M1200 Benutzerhandbuch Seite 6

8. Add more mesh units
Power on the add-on mesh unit, waiting for its system LED becomes solid on.
Within 2 minutes, press the pair button of both the add-on mesh unit and the main
mesh (the one you already configured).
Waiting for the system LED of the add-on unit becomes solid white, means successfully.
Main
Note: For other LED status, please check the LED status explanation. Or you can contact
our support team support@cudy.com
LED Explanation
LED Status
Red
White
Red, White Red
Press 1 second
Main Mesh
Power Starting up
LED
Solid System ready,
no internet
Flash Pairing
Solid Connected to
internet
N/A
Add on Mesh
Add on Mesh
Starting up
System ready,
not connected to main mesh
Connected to main mesh, signal is not
good
Connected to main mesh,
signal is good
Pairing
6