WERKU WK403240 Original Anleitungen Seite 2

ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku ® declares that the WK403240 mixer is in
accordance with the following Directives and Stan-
dards:
2014/30/EU
2006/42/EC
EN60745-1:2009+A11:2010
EN60745-2-1:2010
EK9-BE-87:2014
EK9-BE-88:2014
EN ISO 12100:2010
EN55014-1:2006/+A1:2009/+A2:2011
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013
La Coruña, 01/04/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power ......................................................... 1600W
Mixing capacity ........................................... 100 kg
Class .................................................................. II
Protection index ........................................... IP20
Speed rate range I ............................ 200-480 min
Speed rate range II .......................... 250-680 min
Speeds ......................................................... 12 (6x2)
Spindle ........................................................... HEX13
Mixer diameter ............................................. 120 mm
Mixer length ................................................. 550 mm
Net weight ................................................... 6.8 kg
Acoustic pressure LpA ............................. 84.0 dB(A)
Respective uncertainity KpA ...................... 3 dB(A)
Acoustic pressure LwA ........................... 95.0 dB(A)
Respective uncertainity KwA ..................... 3 dB(A)
Vibration Ah ........................................... 4.21 m/s²
Respective uncertainity Kh ....................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one power tool with another. The
declared vibration total value may also be used in a
preliminary assessment of exposure. Warning: vibra-
tion emission during actual use of this power tool can
differ from the declared total value depending on the
ways in which this power tool is used. Warning: identify
safety measures to protect the operator, based on an
estimation of exposure in the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear mouth and nose protection
Double insulation
European conformity
2002/96/CE directive
SAFETY INSTRUCTIONS.
This power tool is intended to function as a mixer.
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may re-
sult in electric shock, fire and/or serious injury. Keep
all warnings and all instructions for future referen-
ce. Accidents can be avoided in many cases by re-
-1
cognizing a potentially hazardous situation before
-1
it occurs and by observing appropriate safety pro-
cedures. Operations, such as grinding, wire brus-
hing, polishing or cutting-off are not recommended
to be performed with this power tool. Operations for
which this power tool was not designed may create
a hazard and cause personal injury.
IMPORTANT SAFETY INSTRUCTIONS FOR MIXERS.
1) Hold this power tool with both hands at the intended
handles. Loss of control can cause personal injury.
2) Ensure sufficient ventilation when mixing flam-
mable materials to avoid a hazardous atmosphere.
Developing vapour may be inhaled or be ignited by
the sparks this power tool produces.
3) Do not mix food. This power tool and its acces-
sories are not designed for processing food.
4) Keep the cord away from the working area. The
cord may be entangled by the mix container.
5) Ensure that the mix container is placed in a firm
and secure position. A container that is not properly
secured may move unexpectedly.
2
English