Maintenance And Cleaning - AEG BSS 4809 Handbuch

English
56

Maintenance and Cleaning

CAUTION:
Never immerse the unit in water!
• There are no parts inside the device which can be maintained by the user.
• Clean the speaker with a slightly damp cloth without cleaning agent.
Troubleshooting
Symptoms
Cannot switch the
speaker on
No audio signal during
playback through AUX
No audio signal during
Bluetooth connection
Cannot connect
speaker
Possible cause
Battery empty
Volume of the external audio
source is too low.
Volume of the device too
low.
Speaker is switched off
Speaker is not paired to the
audio source.
Audio cable is connected.
Volume too low
Pairing does not work
Audio source is turned off
Bluetooth is turned off on
the audio source.
Bluetooth version is not
supported.
Solution
Charge the battery ( Page 52)
Increase the volume of the external
audio source.
Increase the volume with the
button (3).
Switch the speaker on.
Check whether the connection
exists. If necessary, pair the speaker
to the audio source again.
Remove the cable.
Increase the volume on the
speaker
Increase the volume on the audio
source.
Check, whether the audio source
supports the A2DP protocol.
Turn the audio source on
Turn the Bluetooth function on in
the audio source.
Use another playback unit.