A&D GC-Serie Kurzanleitung Seite 3

the product to fall and be damaged. Hold the bottom side of the base unit when lifting,
moving and carrying the scale.
Use the scale indoors. If used outdoors, the scale may be subjected to lightning
surges that exceed the discharge capacity. It may not be able to withstand the energy
of the lightning and may be damaged.
Consider the following installation conditions in order to obtain the proper
performance.
The ideal conditions for installation are stable temperature and humidity, solid and
level surface, location with no draft or vibration, indoors out of direct sunlight and a
stable power supply.
Do not install the scale on a soft floor or where there is vibration.
Do not install the scale in location where breezes or large fluctuations in temperature
occur.
Avoid locations in direct sunlight.
Do not install in a location with strong magnetic fields or strong radio signals.
Do not install the scale in a location where static electricity is likely to occur.
When humidity is 45% R.H. or less, plastic and insulating materials are susceptible to
being charged with static electricity due to friction, etc.
The scale is not dustproof and waterproof. Install the scale in a location that will not
become wet.
When the AC adapter is connected to an unstable AC power supply, it may
malfunction.
Turn on the scale using the ON/OFF key and keep the weighing display on for at
least 30 minutes before use.
Precautions when weighing
Do not place a load exceeding the weighing capacity on the weighing pan.
Do not apply shock to or drop anything on the weighing pan.
Do not use a sharp instrument such as a pencil or pen to press keys or switches.
Press the ZERO key before each weighing to reduce weighing errors.
Periodically confirm that weighing values are correct.
Periodic sensitivity adjustment is recommended in order to maintain accurate
weighing.
Precautions for storing
Do not disassemble and remodel the scale.
Wipe using a lint-free soft cloth slightly moistened with a mild detergent when cleaning
the scale. Do not use organic solvents.
Prevent water, dust and other foreign materials from getting into the scale.
Do not scrub with a brush or the like.
English (EN)
DANGER
3