Troubleshooting - Wolf E Serie Bedienungs- Und Pflegeanleitung

Care Recommendations
Care Recommendations
CLEANING
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe the surface with a water-dampened microfiber cloth followed by a dry polishing
chamois. Always follow the grain of stainless steel.
Door front
Spray glass cleaner on a cloth to clean.
Touchscreen Use a spray degreaser to remove fingerprints and food soil. Spray on a cloth before wiping the touch-
screen. Do not spray cleaners directly on the touchscreen.
Interior For light cleaning, remove any cooking debris while the oven is still warm using a soft cloth dampened
with water and a mild detergent. Wipe dry with a soft cloth.
Oven rack, rack guides, Oven rack, rack guides, and stainless steel oven pan can be cleaned in the dishwasher.
and oven pan
Temperature probe
Wipe with a cloth and water. Mild detergent may be used for tough stains. Do not submerge the probe in
water or clean in the dishwasher.
10 | English

Troubleshooting

Troubleshooting
OPERATION
Oven does not operate.
•
Verify power is on.
• Verify electrical power to the oven and home circuit
breaker is on.
Oven temperature issue.
•
Contact Wolf Factory Certified Service.
Oven makes sounds during operation.
• The oven may emit switching sounds during operation.
Such sounds are normal.
Oven pans are difficult to remove.
• Some combinations of heat, moisture, and food place-
ment may cause oven pans to warp. Pans will return to
their original shape when cool.
SERVICE
• Maintain the quality built into your product by contact-
ing Wolf Factory Certified Service.
• When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 5 for rating
plate location.
• For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer.
This information should be recorded on page 2.
SERVICE (FOR AUSTRALIA ONLY)
• Yearly maintenance is recommended.
• Maintain the quality built into your product by contact-
ing Wolf Factory Certified Service.
• When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 5 for rating
plate location.
• For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer.
This information should be recorded on page 2.
• For Australia only, contact:
Sub-Zero Group Australia Pty Ltd
Level 10, 469 La Trobe Street
Melbourne Victoria 3000
Phone 03 9600 2218
subzero-wolf.com.au
SERVICE (FOR UNITED KINGDOM ONLY)
• Sub-Zero & Wolf Ltd
9 The Street, Heybridge, Maldon, Essex, CM9 4XB
020 8418 3800
service@subzero-wolf.co.uk
www.subzero-wolf.co.uk