Setup Wizard - Foscam FN8108HE Benutzerhandbuch

Log In
1. Turn on the power switch on the rear panel. After the NVR starts up successfully, the
power LED and HDD LED indicators will turn green. The startup page is displayed on the
screen.
2. Change password . For your security, please set a new password for your NVR before
Log In.
3. Login page.
Enter the Username and Password, then click on the OK button.
4. After modifying the password, you will be taken to the Setup Wizard.

Setup Wizard

The Setup Wizard can walk you through some important settings on the NVR.
7