Upgrade
1. You can upgrade your NVR and cameras system with local Software.
NVR Upgrade:
Download the firmware to the U disk → Insert U disk to NVR USB port → Right-click→
Main Menu → Upgrade → click Refresh → click Upgrade to upgrade your NVR.
Note:
Don't shut down the power during upgrade. After upgrading, NVR restarts.
2. You can upgrade the firmware of your NVR with Foscam VMS. Open and Login Foscam
VMS, select
Setup > System > System Upgrade.
1. Click the button to select
the firmware to the U disk
2. Click the button to
Upgrade
16