Device Connection - Foscam FN8108HE Benutzerhandbuch

Device Connection

Camera Power
Adapter (DC 12V)
NVR Power
Adapter (DC 48V)
Procedure
1. The NVR needs to connect to the router rst, and assign an IP address to the IP
Camera. If the NVR is not connected to the router, it may appear that the NVR cannot nd
the IP Camera.
2. Connect your display to one of the video outputs (VGA or HD-OUT interface).
3. Connect an external storage device to the USB interface of the NVR as a backup.
4. Connect a mouse to the USB interface.
5. Some devices need to connect to your router using an Ethernet cable, including the
NVR, PC and IP Camera. 6. Connect the power adapter to the power input port.
Ethernet
Cable
HD OUT Cable
Mouse
6
Ethernet
Cable
Router
VGA Cable
Monitor
USB HDD