Tweeter Mounting - Kicker Street Serie Benutzerhandbuch

Tweeter Mounting

The tweeter may be through-mounted
behind the mounting surface, or surface-
mounted on top.
For Through-Mounting, cut a circular
hole in the mounting surface at 1.75"
(45mm) for the ST3TW, and 2" (50mm) for
the ST4TW.
Choose a flat location on the panel with
space behind the panel to allow room for
the motor structure, and tweeter. After
checking the clearances, cut a mounting
hole in the panel.
Install the Backing Nut onto the tweeter.
English 9