Automatic Shutdown Function - Concept PERFECT SKIN PRO IL5000 Bedienungsanleitung

EN
you may feel a slight sensation of heat or tingling.
9. Remove the epilator from the treated area of the skin.
10. Move the application surface to the next area of the skin you wish to treat. The pressure
marks left on the skin after using the epilator will help you to choose the right place to
apply the light pulse again, so as to avoid releasing two pulses at the same area or leaving
too much space between the treated areas. The appliance recharges immediately after
each pulse release. When the Ready indicator lights up (after skin contact), the appliance
is ready to release the next pulse.
11. After you finish the treatment, press and hold the On/Off button for 2 seconds to switch
off the device.
12. To treat smaller areas of skin, attach the appropriate attachment with a smaller
application surface.
Warning: Do not treat the same area of the skin more than once during one treatment
session. Re-treatment of the same area of the skin increases the risk of side effects.
MODES
PRECISION mode
The PRECISION mode allows safe treatment of the most inaccessible and sensitive areas, such
as your face, armpits, bikini line, etc. The appliance emits one-time pulses upon pressing the
Pulse release button.
GLISS mode (automatic)
Once the application surface of the appliance is properly applied to the skin, press and
hold the Pulse release button for 2 seconds to activate the GLISS mode. The indicator lights
up (flash icon). The pulses are thus automatically released continuously without the need
for further manipulation. You can therefore simply move the device on the skin without
interruption in a slow and continuous motion, without lifting it up and applying it to the
skin again.
After you finish the treatment, press and hold the On/Off button for 2 seconds to switch off
the device.
The Gliss mode is suitable for users who already have some experience using the device. The
Gliss mode allows you to treat larger areas of skin, such as legs, back, arms, torso, etc., more
safely and quickly. Use the Precision mode to treat sensitive areas and facial skin.
116

AUTOMATIC SHUTDOWN FUNCTION

The IPL epilator automatically switches off after 5 minutes of inactivity. If you want to restart
the appliance, press the On/Off button and set the required power.
COVERING OF THE TREATED SKIN
When releasing the pulses, proceed systematically in successive rows. This method ensures
better control of the pulses and helps you to cover the area better while preventing treating
the same area twice or releasing the pulses too close to each other.
The pressure marks left on the skin after using the epilator will help you to choose the right
place to apply the light pulse again, so as to avoid releasing two pulses at the same area or
leaving too much space between the treated areas. Avoid releasing more than one pulse on
the same area of the skin during one treatment session.
If burns or blisters appear on the skin, stop the treatment immediately.
FACE EPILATION
• When releasing the pulse, do not look directly at the treated area of skin.
• Do not use the appliance to remove eyelashes, eyebrows or head hair.
• The appliance is not suitable for full removal of male beard.
• For your comfort and safety, we recommend asking someone to help you with the first
few treatment sessions.
• Use the PRECISION mode to remove facial hair. DO NOT USE THE GLISS MODE TO TREAT
FACE OR SENSITIVE AREAS.
• When treating your face, it is necessary to wait 5 seconds between each pulse. The
duration of the facial skin treatment session should not exceed 10 minutes.
DURATION OF ONE TREATMENT SESSION
Area
Half of a leg
Whole leg
Bikini line
Armpits
IL5000 IL5000
Average duration Mode
8 to 10 minutes Gliss
15 minutes Gliss
2 minutes Precision
1 minute Precision
EN
117