Table Of Signals - Navkom Touchpad Bedienungsanleitung

All manuals and user guides at all-guides.com
LED BEEP
Blue No
Blue No
Blue No
Blue No
Green Yes
Green Yes
Green No
Green and red No
Green and red Yes
Green and blue No
Red Yes
Red No
Red No
Red and blue No
Red and blue Yes
EN
12

12. TABLE OF SIGNALS

FREQUENCY
The device is ready and waiting for a code to be entered or a function to be
On constantly
activated.
•
The device has been turned off or is not plugged in.
•
Off The device is ready, but the illumination has been turned off. Press any key to turn
it on.
Blinking The device is waiting for a relay to be selected. Press No. 1 for relay 1, No. 2
quickly for relay 2 or No. 1 and 2 together for both relays.
Blinking slowly The device is waiting for the administrator code to be entered.
•
The code is correct.
•
The code has been entered.
1 x 1 s
•
A relay has been selected.
•
Constant illumination has been selected.
3 x 1 s Disabling of the illumination function has been activated.
Blinking
The device is waiting for the illumination mode to be selected.
constantly
•
Function of deleting the user code: Enter the user code which you would like to
Alternately
delete.
•
Function of changing the administrator code: Enter the old administrator code.
3 x 1 s The user code has been deleted.
Alternately Function of adding a user code: Enter a new user code.
3 x 0,2 s The code is incorrect.
A wrong code has been entered three times in a row and the device is
On constantly locked, at first for 10 s. If a wrong code is entered three more times in a
row, the device will lock itself for 2 minutes.
Blinking
Device error.
constantly
Alternately Function of deleting the entire base: Enter the administrator code.
5 x 1 s Function of deleting the entire base: The database has been deleted.
EXPLANATION