Servicing And Repair; Accessories; Technical Specification - Cole Parmer SCT2 Bedienungsanleitung

Servicing and Repair

WARNING: Ensure the hotplate is
disconnected from the mains electricity
supply before attempting maintenance or
servicing.
This equipment does not require routine
servicing. The only maintenance required is to
clean external surfaces with a damp cloth and
mild detergent. Spillages or splashes should be
cleaned up straightaway after isolating the
hotplate from the mains electricity supply.
Repairs -
In the event of product failure it is recommended
that any repair is only undertaken by suitably
qualified personnel.
Only spare parts supplied by Cole-Parmer or
its agent should be used. Fitting of
non-approved parts may affect the
performance of the safety features of the
instrument.
For a comprehensive list of parts required by
service engineers conducting internal repairs, or
to receive a service manual, please contact the
Service Department of Cole-Parmer quoting both
the model and serial number.
Cole-Parmer Ltd.
Beacon Road,
Stone, Staffordshire,
ST15 0SA, United Kingdom
Tel: +44 (0)1785 810475
Email: cpservice@antylia.com
Web: www.coleparmer.com
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: cptechsupport@coleparmer.com
Tel: +44 (0)1785 810433
6

Accessories

A range of accessories detailed below is available
for use with the SCT2 temperature controller.
Part code Description
SCT2/1 Probe holder
SCT1/2 PTFE probe
SR1 Retort rod
SCT1/1/MP Spare metal probe 99955-86
Warranty
Cole-Parmer Ltd. warrants this equipment to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of three (3) years. In the event of a
justified claim, Cole-Parmer will replace any
defective component or replace the unit free of
charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.
Cole-Parmer Ltd.
Beacon Road,
Stone, Staffordshire,
ST15 0SA, United Kingdom
Tel: +44 (0)1785 810475
Email: cpservice@antylia.com
Web:www.coleparmer.com

Technical Specification

Probe
Temperature range ºC
Accuracy, ºC
Resolution
Dimensions, mm (w x d x h)
Net weight, kg
IP rating
Order Code
04807-91
04805-93
04805-91
Stainless steel
20 to 200ºC
±0.5ºC
1ºC
90 x 75 x 123
0.3 (inc. probe)
54