Opening And Closing The Valve; Cleaning And Storage - EASYmaxx HY369 Bedienungsanleitung

1. Hold down the
until the default display on the display is exited.
2. Briefly press
flashes.
3. Keep pressing
AA) for the function you want appears.
4. Adjust the values with
.
The settings mode is automatically exited a few
seconds after the last entry is made.

OPENING AND CLOSING THE VALVE

• To switch off the radiator for a long time, hold
down the
appears on the display and the valve is closed.
To open the valve again, hold down the
button again.
• To permanently open the radiator valve, e.g.
before dismounting the thermostat, hold down
the
the display.
To close the valve again, hold down the
button again.

CLEANING AND STORAGE

• Do not use any caustic or abrasive cleaning
agents to clean the device! These might dam-
age the surface.
button for approx. 5 sec. Off
button for approx. 5 sec. OP appears on
button for approx. 5 sec.
repeatedly until "ADVANCED"
until the number (A1 –
/ and confirm with
29