Operating Modes; Manual Mode - EASYmaxx HY369 Bedienungsanleitung

2. In the case of "Danfoss" valves, slide the
adapter which fits the valve onto the valve and
fix it in place with the associated screw and
nut. Before fitting on valves of the RAV type, the
tappet extension that is also supplied must be
placed on the valve pin first (Picture F).
3. Screw the EASYmaxx thermostat onto the radia-
tor valve or the adapter (Picture D, E).
4. If you have not already done so, insert batteries
into the device (see the "Inserting Batteries"
chapter).
5. Use the button
Then set the current time (minutes, hour) and
the day of the week using the button
and confirm with
6. Confirm the display "AdA" with
vice adjustment process starts and this involves
the device adjusting to the control range of the
valve. This may take a few minutes. The
symbol flashes during this process.
Once the adjustment process is complete, the
device is ready to operate.

OPERATING MODES

Manual Mode

In manual mode, a constant temperature is set as
follows:
1. Press the button
to switch on the display.
.
briefly until
or
. The de-
appears.
23