Installation And Putting Into Operation - EASYmaxx HY369 Bedienungsanleitung

3 x 1.5 V batteries (AA) are required.
1. Take off the battery compartment cover on the
back of the device.
2. Insert batteries into the battery compartment.
Ensure the correct polarity (+ / –).
3. Insert the battery compartment cover and close it.
If the
INSTALLATION AND PUTTING INTO
OPERATION
PLEASE NOTE!
■ Danger of burns from hot radiator valve. Wear
work gloves!
■ In a rented apartment, the permission of the
landlord is required before making any changes
to the radiator.
■ Do not apply any force during installation!
The screw ring of the EASYmaxx digital thermostat
for radiators fits on radiator valves with a thread
measuring M30 x 1.5 mm.
Three adapters are included for valves of the "Dan-
foss" brand (third-party trademark): Danfoss RA,
Danfoss RAVL, Danfoss RAV (Picture C).
1. Set the thermostat which is attached to the
radiator to the highest value (to fully open the
radiator valve) and then take it off.
22
symbol flashes, replace the battery.