Filter Force Reset; Filter Type Change - Philips AC3256 Benutzerhandbuch

Filter force reset

1
Touch and
for 3 seconds to enter the filter force
reset mode.
» Code (A3) of the NanoProtect
S3 filter HEPA displays on the
screen.
2
Touch and hold
force reset the filter lifetime of the
NanoProtect S3 filter HEPA.
3
Code (C7) of the Nanoprotect AC
filter displays on the screen after the
lifetime of the NanoProtect S3 filter
HEPA has been reset.
EN
18
simultaneously
3s
for 3 seconds to
3s
4
Touch and hold
force reset the filter lifetime of the
NanoProtect S3 AC filter and exit
the filter force reset mode.

Filter type change

1
Touch and
for 3 seconds to enter the filter type
change mode.
» Code (A3) of the NanoProtect
S3 filter HEPA displays on the
screen.
2
Touch to select the filter code of
the new filter you will use.
for 3 seconds to
3s
simultaneously
3s