Usage; Filling The Tank With Tap Water And Maremed ® Special Sea Salt - Beurer maremed MK 500 Gebrauchsanweisung

4. Remove the pre-filter holders from the device cover. Place the pre-filters into the two
pre-filter holders. The smooth, firm side must be positioned towards the inside of the
device.
5. Then place the pre-filter holders into the cover of the maremed
pre-filter holders, make sure that the triangle markings
markings are located on the underside of the pre-filter holders and on the underside
of the cover.
6. Place the evaporator block with the water filter into the tank in an upright position.

7. Usage

7.1 Filling the tank with tap water and maremed
Before you can start using the device, you must first fill the tank of the maremed
water and the maremed
IMPORTANT
Use the maremed ®
maremed ® with any other salts! The maremed
Do not add any essential oils or fragrances to the tank either. If other additives are used,
the plastic material may become discoloured and damaged.
All manuals and user guides at all-guides.com
+
® special sea salt.
exclusively with the maremed
=
® special sea salt
® special sea salt. Do not use the
® may be damaged if other salts are used.
30
When inserting the
® .
are aligned. The triangle
® with tap