Product Features; Product Structure - Outwell ARCTIC FROST 35 Bedienungsanleitung

UK: INSTRUCTION MANUAL
IF YOU WISH TO FINALLY DISPOSE OF THE DEVICE
1. Remove cables, lid, tie-down brackets from body with compressor and dispose according to
local regulations. Ask your local recycling centre for details about how to do this in accordance
with the applicable disposal regulations.
2. Place the packaging material in the appropriate recycling waste bins wherever possible.

2. PRODUCT FEATURES

• High-efficiency DC compressor and conversion module.
• CFC free and great heat insulation.
• Lowest cooling to -20°C/-4°F (based on 25°C/77°F room temperature).
• Intelligent battery protection system prevents your vehicle from running out of battery.
• LED display control panel for temperature setting, USB charging port: SV/lA.
• Detachable lithium battery: 15600mAh/11.1V.
• Specific parts: interior drain plug, oversized wheels, telescopic handle, cupholders (in the lid), interior LED
light, cutting board and bottle opener.

3. PRODUCT STRUCTURE

Sealing strip
Left compartment
LED control panel
Telescopic handle
Button
Footpad
Machine compartment
Note: There are buttons on both sides of the telescopic handle, press them at the same time to pull the rod.
The cutting board can be moved by turning the knob on the top cover. Clean and dry the cutting board after
every use.
4
4. REVERSE LID OPENING DIRECTION
The lid opening direction can be changed according to actual needs, please follow the instructions below:
LID DISASSEMBLY:
Lid latch
Cutting board
Right compartment
LID INSTALLATION:
Bottle opener
Handle
Detachable battery
Charging port
Wheel
Open the lid Take off the lid
at a 90® angle from one side
Reverse the lid Align the lid shaft with the
opening direction hole on one side and insert it
UK: INSTRUCTION MANUAL
Take off the lid
from the other side
Fix the lid on the other side,
installaion finished
5