Herunterladen Inhalt Inhalt Diese Seite drucken

Other Functions; Charging The Battery - KLIM Lynx Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16

OTHER FUNCTIONS

Charging the battery

Connect the USB-C charging cable to your computer or other compatible charger (5V/1A or 5V/2A). Connect the
other end of the cable to the headset.
The LED indicator turns red while charging and turns off completely once the charge has finished.
IMPORTANT: all wireless modes are deactivated during the charge. Plug in the 3.5 mm cable to your computer
to continue using the headset while it charges.
Note: when connected to some iOS devices, the battery status will be shown on the device's screen (usually
the top-right corner).
Removable microphone
The KLIM Lynx comes with a removable microphone to improve the quality and offer a better environmental
noise reduction (ENC) during your calls.
Plug it in with the mute button pointing towards your mouth.
To mute it, simply short press the mute button located at the extremity of the microphone.
When the microphone is muted, the headphone will beep one time.
Note: a second built-in microphone allows you to make calls without having to connect the removable
microphone (with a lower call quality).
Vibration Function Switch
To enable the vibrations, flip the vibration switch down (the LED indicator will stay white indefinitely), and the
headphone will vibrate depending on the bass presence in your music, games or movies. The stronger the bass
are, the stronger the vibrations will be.
To turn off the vibrations, flip the vibration switch up.
RGB lights
Press and hold the Picto and Picto buttons for 2 seconds to turn the lights on or off.
Short press these two buttons to change the light color/effect.
Note: the RGB lights are always off while the headphone is charging or in wired mode.
Hint: turning off the RGB lights extends the duration of the battery.
Bluetooth connection reset
Short press the Picto button 5 times in a row. The LED indicator stays green for 2 seconds, and then the
headset enters pairing mode, with the LED flashing in blue and green alternatively.
5
ENGLISH

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für KLIM Lynx

Inhaltsverzeichnis