Taurus CROSSBACK ALL OVER Bedienungsanleitung Seite 9

English
Stick vacuum cleaner
Crossback All over
DESCRIPTION
A Accessory 2 in 1:
A-1 Brush for furniture or textile
A-2 Lance
B Release button of dust tank
C Dust tank.
D Extension tube.
E Motorized brush
E-1 Bristles brush to use on carpets
E-2 Powder brush to use on hard
floors.
F Release button of motorized brush.
G Cyclone and inner filter
H Battery indicator
I Lihtium battery.
J Release button of battery.
K Release button of accessories /exten
tion tube
L ON/OFF button
M Main body
N Wall mounted.
O Power supply.
USE AND CARE:
- Do not use the appliance without its filter(s)
correctly in place.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance to gather up water or
any other liquid.
- Do not use the appliance if the on/off switch
does not work.
- Respect the MAX level indicator(Fig.1)
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not work on areas where there are metal
objects, such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ashes, nails, etc.).
- Do not open the battery/ies under any circums-
tances whatsoever.
- When the battery/ies is not in use, keep it away
from other metal objects like paper clips, coins,
keys, screws ..that could connect a terminal to
another.
- Do not short-circuit the battery terminals as
this may cause an explosion or fire.
- The battery/ies should be stored at a tempera-
ture of below 40ºC.
- Only use the appliance for carrying out dry
tasks
- Never leave the appliance connected and un-
attended if is not in useThis saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Recharge the battery/ies only with the charger
supplied by the manufacturerA charger that
is suitable for one type of battery may cause
explosion or fire hazard when used with other
battery/ies.
- Use the device only with the battery/ies for
which has been specifically designedThe use
of any other battery/ies s can cause an explo-
sion or fire hazard.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance
- Make sure the battery is securely in pla-
ce(Fig.2)
ASSEMBLING THE WALL BRACKET:
- The appliance has a wall bracket (N) which
must be fixed to the wall.
- Fix the wall bracket as you think appropriate,
using plugs, screws, and adhesive...
- Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of
the appliance.
- Fit the appliance into the wall support.
CHARGING THE BATTERY
- Caution: A new battery is not fully charged and
must therefore be charged before the applian-
ce is used for the first time.
- Charge the battery at an atmospheric tempera-
ture of between 4 and 40ºC.
- Plug the charger (O) into the mains