1. Open the packaging.
2. Place the treadmill on the ground.
3. Install 2 extension bars for the treadmill (M6x12mm).
4. Install the suction cup.
5. Installation of 2 mobile wheels.
6. Two long screws (M6x35mm) to secure the treadmill.
7. Put the battery in
8. Electronic table insert tab slot.
9. Connect the lines of the electronic table.
10. Install support screw (M8x20mm).
11. Install support arm screw (M8x35mm) > nuts.
12. Install the support arm screw (M8x20mm).
13. Adjust height as required.
14. Tighten the support arm screw.
15. When not in use, remove the clubs and turn them to the side.
Display function
Scanning function: data displayed every 6 seconds
Time function: display the current cumulative training time, up to 99:59
Speed function: display current movement speed, the maximum speed reached
99.9KM
Distance function: show current total kilometres, up to 99. 9KM
Calorie function: show total calories consumed so far
9