nordfalk Deluxe 42418 Gebrauchsanleitung Seite 10

Walking machine instructions
How to adjust
1. Treadmill tilted to the left
If the treadmill is on the left side, turn the left side of the adjusting screw 1-2
turns clockwise to the right, adjust the bolt 1-2 turns counterclockwise, and
then stand on the treadmill for a while. If you do not return to the centre
position, repeat until you return to the centre position.
2. Treadmill tilted to the right
If the treadmill is on the right side, turn the adjusting screw on the right side
clockwise 1-2 times, turn the adjusting screw on the left side counterclockwise
1-2 times, and then stop walking with the above treadmill for a certain time if it
does not return to the centre position, repeat this until you are back in the
centre position.
3. Tight or loose running
If the belt is too tight, the rear bearing will be damaged. Use both sides of the
hexagonal bolt to turn anticlockwise 1-2 times. Relax to turn without slipping or
pausing. If the belt is loose, use two corners on both sides of the bolt. Turn 1-2
turns clockwise.
How to lubricate the treadmill
Treadmills are greased and require regular maintenance of the running surfaces,
and running friction belts have a great effect on the life of the treadmill, because
they send the oil to the underlying belt.
1. Undo the treadmill slightly.
2. Put some oil on the baffle plate under the treadmill.
10