Herunterladen Diese Seite drucken

Fehlerbehebung; Sicherheitshinweise - Technoline WS 6815 Bedienungsanleitung

Led-funkwecker mit innen- und außentemperatur
Vorschau ausblenden Andere Handbücher für WS 6815:

Werbung

AN- oder AUSSCHALTEN des Alarms
Single press ALM one at a time to turn on or off the alarm. When the alarm function is turned on,
the AL icon appears on top of the time digits.
To use the snooze function
When time reaches your set alarm time, your clock will give a beep sound to wake you up. The AL
icon will flash.
1.
Press SNOOZE once to stop the alarm temporarily, AL icon keeps flashing. The alarm will
beep again in 5 minutes or after your set snooze duration.
2.
To stop the daily alarm, press any button except the snooze when alarm is beeping. The
alarm will stop and AL icon becomes static; alarm will beep again same time next day.
Alarm Duration: 2 minutes
If you lose the outdoor temperature
When the outdoor temperature digits show "--", the wireless transmission is either interrupted or lost.
Press & hold
button of the weather station, then press the RESET button located on the back of
the outdoor transmitter. If you continue to lose the outdoor temperature display, try placing the
transmitter in a different location until you have smooth transmission of temperature data.
DIMM-FUNKTION
Press SNOOZE / DIMMER once to adjust the high/ low brightness of the display.

FEHLERBEHEBUNG

In case your clock shows irrelevant information or digits, it maybe affected by electrostatic discharge
or interferences from other devices. Press the RESET button on the back of your clock. Your clock
will be reset to default setting of time and calendar and it will start to receive radio controlled time
signal again.

SICHERHEITSHINWEISE

1.
Do not expose the unit to extreme temperature, water or direct sunlight.
2.
Avoid contact with any corrosive materials.
3.
Do not subject the unit to excessive force, dust or humidity.
4.
Do not open the inner back case or tamper with any components of this unit.
P. 5

Werbung

loading