Cleaning And Maintenance; Cleaning And Maintain - Razorri PTK17A Benutzerhandbuch

Always disconnect the appliance from the power outlet and let it completely cool down
before cleaning.
Clean the bottom of the glass kettle and the control panel dry with a moist cloth as
needed. Let dry completely before using the kettle again. Never immerse them into
water in case electric shocks. Do not use any corrosive cleaner.
Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the
kettle, or the glass will get scratched or cracked.
The power cord can be stored underneath the power base when the tea maker is not in
use.
Removal of Mineral Deposits
Your kettle should be periodically descaled as the mineral deposits in tap water may
form a scale on the bottom of the kettle. This buildup can negatively affect the efficiency
of the kettle.
You can use any commercially available descaler and follow the instructions on the
package of descaler. Alternatively, you may follow the below instructions using white
vinegar.
(1) Add 7oz (200ml) of white vinegar and at least 70oz (2000ml) of water to cover the
bottom of the kettle completely. Leave the solution in the kettle overnight. Do not boil
this mixture.
(2) Discard the mixture in the kettle, fill the kettle with clean water to the maximum position,
then boil and discard the water. Repeat several times until the odor of vinegar has been
flushed away. Any stains remaining inside the spout can be removed by rubbing with
a damp cloth.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working
electrical equipment to an appropriate waste disposal center.

Cleaning and Maintenance

10