Crossover Wiring & Mounting - Ra Audio Ra13.2 Bedienungsanleitung

CROSSOVER WIRING & MOUNTING
a Wire the crossover unit as shown in the schematic diagram below. Be sure
to maintain speaker polarity at the input/output terminals of the crossover!
Don't forget to route the tweeter extension wire (and midrange for the
RA16.3 set) from the x-over to the place, where the tweeters are going to be
installed.
s The transparent cover of the x-over housing can be pushed back to gain
access to the screw mounting holes. Fix the crossover in place with the
provided self-tapping screws. Try to avoid the places that expose the
crossovers to dripping water, excess humidity or other fluids.
Fig.: Crossover Wiring
RA13.2/RA16.2
Fig.: Crossover Wiring
RA16.3
RA16.3 Manual 8
8 8
11.11.2005 10:38:04 Uhr