Initial Setup; Before Using For The First Time; Before Each Trip - Micro COMMUTER Originalbetriebsanleitung

INITIAL SETUP

Before using for the first time

● Check the scope of delivery:
Scooter, Chargers & Power cable, User Manual, Battery (see "Components" on page 4).
● The battery is only partially charged upon delivery. Before using for the first time,
fully charge the battery using the chargers provided.

Before each trip

The electric scooter must be checked for its roadworthiness before each trip. The
vehicle is delivered by the manufacturer fully ready for use. Because defects potentially
impairing the function of the vehicle may occur during transport as well as during any
periods off the road, please always pay attention to the following points before using
for the first time and before each trip:
Test item
Lights
General condition
Brakes
Folding mechanism
Battery charge status
Current riding mode
Battery
It is imperative to check the wear of the tyres and the tightness of the screws regularly.
Are the lights turned on? (see "Light functions" on page 18)
Are all screws tightened firmly and all components secured?
Are the brakes set correctly and fully functional?
Has the folding mechanism clicked into place properly and is
the clamping lever closed and tightened firmly?
Is the battery sufficiently charged?
Which driving mode is currently set?
Is the battery properly mounted?
Test content
15