AB CHORUS CI-5292 Bedienungsanleitung Seite 10

Power on/off: To turn the power off using the power/
program button, hold down the button for at least 4
seconds. To turn the power on, press the button until
the LED status indicator illuminates.
NOTE: Turning the power off and then back on always resets the Cho-
rus Sound Processor to program 1, and volume in the middle position.
Sensitivity will start in the position set for program 1 during fitting.
Volume increase/decrease: To increase the volume,
press the '+' symbol on the volume button. To
decrease the volume, press the '-' symbol on the
volume button. There are 10 volume steps up and 10
volume steps down. Consult your cochlear implant
professional if you have any concerns regarding your
volume settings.
Sensitivity increase/decrease: To increase the
sensitivity, press the largest circle on the sensitivity
button. To decrease the sensitivity, press the smallest
circle on the sensitivity button. There are 10 steps up
and 10 steps down. Consult your cochlear implant
professional if you have any concerns regarding your
sensitivity settings.
9