HammerSmith MultiTool Gebrauchsanweisung Seite 11

the respective conditions; these
reduce the risk of injury.
• Avoid unintentional starting
of the device. Ensure that the
device switch is in the OFF
position before inserting the
battery pack, picking up, or
operating the device. Powering
up the tool with the switch
turned to ON can lead to
accidents.
• Remove the adjustment key
before switching on the device.
If a wrench or adjustment key
is left on the rotating part of the
power section, this can lead to
injuries.
• Do not over-tighten the
attachment. Always make
sure that you can maintain a
strong and balanced stance.
This assures better control in
unexpected situations.
• Do not over-estimate your
capacities. Make sure you have
a secure stance and balance
at all times. This allows for
better control over the device in
unforeseen situations.
• Wear appropriate clothing.
Do not wear loose clothing or
jewellery. Make sure that hair,
clothing and gloves cannot
become caught in the moving
parts.
4. USE AND CARE OF THE
DEVICE
• Use the correct device
configuration for the respective
application. A properly
configured device will allow
better execution of the task and
is safer for the intended purpose.
• Do not use the device if the
on/off switch is not working
correctly. Any device that cannot
be switched on and off with the
switch is dangerous and must
be repaired immediately by a